Parking Lot Layout Design
In South Atlanta, GA
Customized Parking Lot Layouts
1-800-STRIPER provides professional parking lot layout design in South Atlanta, GA — custom layouts that maximize stall count, ensure ADA compliance per the 2010 ADA Standards for Accessible Design, and meet MUTCD pavement-marking specifications using Graco LineLazer precision striping equipment.
1-800-STRIPER® of Atlanta OTP South PROVIDes New Layouts Services NEAR YOU
Are you ready to create a great first impression?
A proper parking lot layout with clear markings is critical for any business that serves the public. Let us help you make a great first impression with an attractive, well-organized, and safe parking lot.
Benefits:
Parking Lot Layout Design Services in South Atlanta, GA
Parking lot layout design plans stall counts, aisle widths, and traffic flow before any striping begins, so a lot fits the maximum usable spaces while staying code-compliant. The design process starts with an on-site measurement of the lot’s dimensions, entrances, and existing obstacles, then maps stalls, drive aisles, and accessible spaces to those measurements. The finished layout accounts for two-way traffic flow, delivery and fire-lane access, and ADA-compliant space placement before a single line goes down. Once the layout is approved, we apply it with Graco LineLazer precision striping equipment for accurate, consistent lines across the south metro.
Maximizing Stall Count with ADA & MUTCD Compliance
A well-designed parking lot layout fits the maximum number of standard stalls while meeting the accessible-space minimums set by the 2010 ADA Standards for Accessible Design. The U.S. Access Board publishes the technical dimensions referenced in the table below, including access-aisle widths for standard and van-accessible stalls, and every layout places accessible stalls at the count and size those figures require for the lot’s total space count.
| Layout Element | Standard Dimension |
|---|---|
| Standard stall | 9 ft × 18 ft |
| 90° two-way drive aisle | 24 ft minimum |
| ADA accessible stall | 8 ft stall + 5 ft access aisle |
| ADA van-accessible stall | 11 ft stall + 5 ft aisle, or 8 ft stall + 8 ft aisle |
Drive aisles sized to the 24-ft two-way minimum keep vehicles moving safely between rows, and 9×18-ft stalls remain the baseline dimension most commercial lots use to balance stall count against aisle width.
For a full list of our pavement marking services, visit our parking lot striping in South Atlanta page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new
We proudly work with:
We proudly work with:
Frequently Asked Questions About Parking Lot Layout Design in South Atlanta, GA
What makes an efficient parking lot layout?
An efficient layout uses 90-degree stalls with aisles running parallel to the lot’s longest side, minimizes dead-end aisles, and places accessible stalls near the building entrance. This configuration fits the most stalls into a given lot size while keeping two-way drive aisles at the 24-ft minimum vehicles need to pass and back out of stalls safely. Every parking lot layout design project in South Atlanta, GA follows these same principles before a plan is striped.
What are standard parking stall dimensions?
Most commercial parking lots use a standard stall size of 9 ft wide by 18 ft deep, which balances vehicle fit against total stall count. Some jurisdictions allow narrower stalls in compact-only sections, but 9×18 ft remains the baseline dimension used in layout planning across the south metro. Stall width also affects door-opening clearance, so layouts near high-turnover entrances sometimes hold to the full 9-ft width.
How wide are 90-degree two-way drive aisles?
A drive aisle serving 90-degree stalls with two-way traffic needs a minimum width of 24 ft, wide enough for vehicles to pass each other and back out of stalls safely. Narrower aisles increase backing conflicts and slow traffic flow, so 24 ft is the standard layout-planning benchmark for 90-degree stall configurations. One-way aisles serving angled stalls can sometimes run narrower.
How many accessible stalls does a lot need?
The required number of accessible stalls comes from a sliding-scale table in the 2010 ADA Standards §208.2, based on a lot’s total stall count. For example, a lot with 1–25 total spaces needs at least 1 accessible stall, and a 76–100-space lot needs at least 4. At least 1 in every 6 accessible stalls must be van-accessible. We apply this table when designing or auditing a layout, so the accessible-stall count matches the lot’s total size.
Do you redesign an existing lot or only design new lots?
Layout design covers both new pavement and existing lots being restriped, since a restripe is a practical opportunity to correct an inefficient or non-compliant layout. Redesigning an existing lot works within the current pavement footprint, adjusting stall angles, aisle widths, and accessible-space placement to current ADA and MUTCD figures. For new construction, we plan the layout before paving so stall counts and drive aisles get set from the lot’s original dimensions.
What information do you need to design a layout?
A layout design starts with the lot’s overall dimensions, entrance and exit locations, any existing obstacles like light poles or drains, and how the property will be used. From there, we map stalls, drive aisles, and accessible spaces to those measurements and the applicable ADA and MUTCD figures. Call (404) 902-8202 for a free estimate to start a layout design for a property in South Atlanta, GA. —