Parking Lot Sign Installation
In North Atlanta, GA
ADA, Fire Lane, and Directional Signage
1-800-STRIPER provides professional parking lot sign installation in North Atlanta, GA — ADA R7-8 accessible-space signs, fire lane “No Parking” signs, directional signage, and tow-away warnings per the 2010 ADA Standards and the MUTCD across the six-county OTP North area.
1-800-STRIPER® of Atlanta OTP North PROVIDes Signage Installations Services NEAR YOU
Are you communicating clearly?
We install new signs in adherence with local regulatory standards and can repair or replace damaged signs so you can clearly communicate your parking requirements.
Parking Lot Signs We Install
Most commercial properties need five sign categories: ADA reserved-parking signs (MUTCD R7-8) at every accessible space; fire lane “No Parking” signs (MUTCD R7-1 with custom fire-lane plate) at each end and along the length of a designated fire lane; directional signs (one-way arrows, enter/exit, stop) at intersections and entries; tow-away enforcement signs at unauthorized-parking zones; and reserved/customer/employee-only signs where the property differentiates use.
We supply, install, and replace all five. Signs are sourced from MUTCD-compliant suppliers — the same federal-spec signs used by GDOT contractors and municipal sign shops. Custom plates (your business name on a reserved sign, your property’s tow-company contact on an enforcement sign) get printed to MUTCD legend size on aluminum blanks.
ADA + MUTCD Sign Mount Height Requirements
ADA accessible-parking signs sit at the strictest mount-height standard on the lot. The 2010 ADA Standards § 502.6 require the bottom of the R7-8 sign to be at least 60 inches above the finished grade so the sign remains visible above a parked vehicle. Most signs end up at 60 to 84 inches bottom-of-sign depending on the height of the vehicles typically parked there.
MUTCD § 2A.18 sets the broader sign-mount standard for parking lots: 7-foot minimum bottom-of-sign in pedestrian areas (which is what most parking lots qualify as), measured from the nearest paved surface. Where the lot serves vehicles only with no pedestrian crossing, the 5-foot minimum from MUTCD § 2A.18 applies. We default to the ADA-stricter 60-inch standard at accessible spaces and the MUTCD 7-foot standard everywhere else.
Van-accessible stalls add a “Van Accessible” plaque immediately below the R7-8. Georgia penalty plaques add a citation of OCGA § 40-6-226 (the state accessible-parking violation fine schedule) below the R7-8.
Sign Hardware: Posts, Anchors, and Footings
Standard parking-lot sign posts in North Atlanta are 2-pounds-per-foot galvanized U-channel steel, 10 to 12 feet long. Heavier square-tube posts get used on perimeter security signage or at locations vulnerable to vehicle impact. Mounting hardware is galvanized bolts with anti-rotation tabs.
Anchoring depends on the surface. Asphalt installations use a 24- to 36-inch driven post or a concrete-set footing depending on traffic exposure. Concrete installations use a core-drilled anchor with epoxy bond. Where the approach speed exceeds 30 mph (perimeter signs along arterials), we install breakaway bases per MUTCD § 2A.16.
Marietta and Cobb County Sign Code Compliance
Sign installation also touches local zoning. The City of Marietta Code regulates on-premises signs including reserved-parking, directional, and identification signage. Properties in unincorporated Cobb County fall under the Cobb County Zoning Ordinance. Sister municipalities — Roswell, Alpharetta, Sandy Springs, Dunwoody, Duluth, Buford — each have their own sign code chapters.
For ADA-mandated signs (R7-8, fire-lane “No Parking”), the federal and state safety code preempts local zoning size and height limits — those signs install at the required ADA/MUTCD dimensions regardless of the local sign ordinance. For reserved, directional, or branded signs, we verify with the local zoning office before installation. Reusing existing posts that already comply is the cleanest path when it’s available.
For a full list of our pavement marking services, visit our parking lot striping in North Atlanta page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new
We proudly work with:
We proudly work with:
Frequently Asked Questions About Parking Lot Sign Installation in North Atlanta, GA
What signs are required at ADA-accessible parking spaces?
Every accessible space requires an R7-8 reserved-parking sign per 2010 ADA Standards § 502.6, mounted with the bottom at least 60 inches above the finished grade. Van-accessible spaces add a “Van Accessible” designation either as a plaque below the R7-8 or printed on the same panel. Georgia penalty plaques citing OCGA § 40-6-226 mount below the R7-8 at the same post.
How high should parking lot signs be mounted?
ADA-accessible parking signs: 60-inch minimum bottom-of-sign per § 502.6. Other parking-lot signs in pedestrian areas: 7-foot minimum per MUTCD § 2A.18. Perimeter signs along high-speed approaches: same 7-foot minimum, with a breakaway base where approach speed exceeds 30 mph.
How are parking lot signs installed on asphalt vs concrete?
Asphalt: we drive a 24- to 36-inch galvanized U-channel post into compacted asphalt and lock it with a concrete-set footing where the location demands long-term stability or high exposure. Concrete: core-drill the slab to the required depth, epoxy-set the post, and grout the surface flush. Both methods give a 10-plus year service life on a 2 lb/ft U-channel.
Can you re-use existing sign posts when replacing faded or damaged signs?
Yes when the post itself is sound (no rust-through, no impact damage, no wrong-height issue), we replace just the sign panel and hardware. That’s the cleanest path when the existing layout already complies with ADA and MUTCD heights. If the post is wrong height, rust-compromised, or off-spec, we replace it.
What’s the standard letter height on a parking lot sign?
MUTCD R7-8 reserved-parking signs use 1-inch letters minimum per MUTCD § 2D.04 sizing for pedestrian-area signs. Fire-lane signs use the same letter scale. Directional signs (one-way, enter, exit, stop) sized to MUTCD R-series specs. Custom legends (business name, tow contact) typically match the MUTCD letter height for visual consistency.
Do you replace faded or damaged parking lot signs?
Yes — sign replacement is one of our common scopes. Aluminum sign blanks fade in roughly 7 to 10 years under direct Georgia sun; vinyl-overlay reflective sheeting fades faster. We do single-sign replacement (one damaged R7-8 after a vehicle impact) and lot-wide refresh (every sign at once on an aging property).