Parking Lot Sign Installation
In Midwest Houston, TX
ADA, Fire Lane, and Directional Signage
1-800-STRIPER provides professional parking lot sign installation in Midwest Houston, TX — installing ADA accessible-parking signs, fire-lane and no-parking signs, directional signage, and tow-away warnings per the 2010 ADA Standards for Accessible Design and the Texas Manual on Uniform Traffic Control Devices.
1-800-STRIPER® of Midwest Houston PROVIDes Signage Installations Services NEAR YOU
Are you communicating clearly?
We install new signs in adherence with local regulatory standards and can repair or replace damaged signs so you can clearly communicate your parking requirements.
What Parking Lot Sign Installation Includes
Parking lot signs are the posted half of a compliant lot — the striping tells drivers where the lines are, and the signs tell them the rules. We install the full set: ADA accessible-parking signs with the required symbol and mounting, fire-lane and no-parking signs, tow-away warnings, and directional signs for entrances, exits, one-way aisles, and stop points. We set new posts, mount signs on existing posts or building walls, and replace signs that have faded, bent, or gone missing.
One point worth clearing up first: the regulatory signs on a parking lot are not governed by Houston’s Sign Code, which covers commercial advertising signage. Accessible, fire-lane, and directional signs answer to the ADA and the fire code instead — which is what we install to.
ADA Accessible-Parking Sign Requirements
Every accessible space needs a sign, and the requirement is specific. Under §502.6 of the 2010 ADA Standards for Accessible Design, each accessible space is marked with a sign bearing the International Symbol of Accessibility, mounted high enough that the bottom of the sign sits at least sixty inches above the ground — measured to the bottom of the sign — so it stays visible over a parked vehicle. Van-accessible spaces carry an added “van accessible” designation below the main sign.
Getting the height wrong is one of the most common reasons an accessible space fails a check, because a sign mounted too low disappears behind the next parked SUV. We set every accessible sign to the sixty-inch minimum and add the van designation where the space calls for it.
Fire-Lane, No-Parking & Tow-Away Signs
Fire lanes and no-parking zones need posted signs to be enforceable, and in Texas so does towing from a private lot. Fire-lane and no-parking signs follow the marking and enforcement approach the Houston Fire Department sets under the adopted fire code; the familiar R7-series sign shapes come from the Texas Manual on Uniform Traffic Control Devices as a convention.
Tow-away is the one with a hard statute behind it. Under Texas Occupations Code §2308.301, a parking-facility owner cannot have an unauthorized vehicle towed unless a sign prohibiting unauthorized parking faces and is clearly visible to a driver entering the lot. The law is specific about placement — a sign at each driveway or, where entrances are not clearly defined, spaced so no entry point is more than 25 feet from one — and about content: the sign must state who may park and prohibit everyone else, and it must carry a 24-hour telephone number a vehicle owner can call to locate a towed car. We install tow-away signage to those requirements so your lot’s towing is actually enforceable.
Our Sign Installation Process
- Survey the lot. We walk the property and list every sign it needs — accessible, fire-lane, tow-away, and directional — and where each has to sit to do its job and meet the rule.
- Set posts and mounts. We install new posts where needed, anchored for the surface, or mount to existing posts and walls.
- Hang to spec. We mount each sign at the required height and position — sixty inches for accessible signs, entrance-visible for tow-away.
- Verify. We confirm the signs are placed, plumb, and readable before we finish.
For a full list of our pavement marking services, visit our parking lot striping in Midwest Houston page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new
We proudly work with:
We proudly work with:
Frequently Asked Questions About Parking Lot Sign Installation in Midwest Houston, TX
What signs does an accessible parking space need?
Each accessible space needs a sign with the International Symbol of Accessibility, and van-accessible spaces add a “van accessible” designation. The sign has to be mounted so the bottom sits at least sixty inches above the ground, so it stays visible over a parked vehicle. We install them to that spec as part of striping the space or on their own.
How high does an accessible parking sign have to be?
The bottom of the sign must be at least sixty inches above the ground under ADA §502.6. That height keeps the sign readable over a parked car or SUV — a common failure point is a sign set too low. We mount every accessible sign to the sixty-inch minimum.
What does a Texas tow-away sign have to say?
Under Texas Occupations Code §2308.301, a private-lot tow-away sign must face drivers entering the lot, state who is allowed to park and prohibit everyone else, and include a 24-hour phone number to locate a towed vehicle. Placement is regulated too — a sign at each entrance, or spaced so no entry is more than 25 feet from one. Without compliant signs, the towing is not enforceable, so we install them to the statute.
Do fire lanes need signs as well as painted curbs?
Usually, yes. Fire lanes are typically marked with both painted curbs or lanes and posted “Fire Lane — No Parking” signs, following what the Houston Fire Department requires for the property. The signs make the restriction visible and enforceable. We install fire-lane signage to the approach the fire code official sets for your lot.
Who installs parking lot signs?
We do — as a standalone job or alongside striping. Because signs and pavement markings work together, it is common to install or replace signs when a lot is striped or restriped, so the posted rules match the fresh lines. We handle the posts, the mounting, and the correct heights.
Can you replace faded or damaged signs?
Yes. Sun, weather, and the occasional bump leave signs faded, bent, or missing, and a sign that cannot be read does not do its job — or, for tow-away and accessible signs, meet the requirement. We replace individual signs or re-sign a whole lot, matching each to the current standard.