Parking Lot Sign Installation
In North Denver, CO
ADA, Fire Lane, and Directional Signage
1-800-STRIPER provides professional parking lot sign installation in North Denver, CO — installing ADA R7-8 accessible-space signs, fire lane no-parking signs, directional signage, and tow-away warnings per the 2010 ADA Standards for Accessible Design, MUTCD, and the Denver Zoning Code for commercial properties throughout the north Denver metro.
1-800-STRIPER® of North Denver PROVIDes Signage Installations Services NEAR YOU
Are you communicating clearly?
We install new signs in adherence with local regulatory standards and can repair or replace damaged signs so you can clearly communicate your parking requirements.
Parking Lot Sign Installation in North Denver, CO
A parking lot’s signs do two jobs at once: they keep people safe and they keep the property in compliance. We install ADA accessible-parking signs, fire lane and no-parking signs, directional and one-way markers, reserved and visitor signs, and stop and speed signs across commercial lots in the north Denver metro. Every sign has a rule behind it. Accessible spaces need signage that meets the 2010 ADA Standards for Accessible Design, fire lanes have to stay clear and marked for emergency access, and traffic controls guide vehicles so drivers and pedestrians don’t cross paths at the wrong moment. Miss one and you invite a citation, a blocked fire lane, or a fender-bender in your own lot. We handle the signs, the posts, and the placement so the finished lot reads clearly to every driver who pulls in.
Signs We Install
We install the full range of parking lot signage. ADA accessible-parking signs — the MUTCD R7-8 sign — mark each reserved accessible space, and van-accessible spaces get the R7-8a plaque mounted below. Fire lane, no-parking, and tow-away signs keep emergency access open and put drivers on notice that a vehicle left there can be removed. Directional and one-way signs move traffic in a single predictable pattern, which matters most in tight lots and around drive-thru stacking. Reserved, visitor, and EV-charging signs assign spaces to the right users and protect charging stalls from being blocked. Stop and speed signs slow traffic at intersections and crosswalks inside private lots, where the property owner sets the rules. If your lot needs a sign we haven’t listed, tell us what problem you’re solving and we’ll spec the right one — the goal is always the same, a lot that tells drivers exactly what to do without anyone having to guess.
ADA & MUTCD Sign Placement Standards
Sign placement is measured, not eyeballed. The standards below come from the 2010 ADA Standards for Accessible Design and the MUTCD, with fire-lane and tow-away signage following local AHJ and Denver requirements.
| Sign / element | Placement standard |
|---|---|
| ADA accessible-parking sign (R7-8) | Bottom of sign ≥ 60 in above the ground, at the head of each accessible space |
| Van-accessible plaque (R7-8a) | Mounted below the R7-8 sign at van spaces |
| Tow-away / enforcement notice | Posted per local requirements, visible from the space |
| Post embedment | Set in ground/footing (commonly ~24–36 in) for wind and stability |
The 60-inch mounting height is the one people get wrong most often. Measured to the bottom of the sign, it keeps the accessible-parking sign visible above the roof of a parked vehicle, so a driver looking for the space can see it even when the lot is full. The R7-8a van plaque sits directly below the R7-8 sign at van-accessible spaces. Fire-lane and tow-away signs don’t follow a single national height — they’re posted where the local authority having jurisdiction requires, visible from the space they govern, which in the north Denver metro means placing to Denver and AHJ direction. Post embedment matters just as much: a sign is only as steady as its footing, and Colorado’s wind and freeze-thaw cycles punish anything set too shallow.
Our Sign Installation Process
We follow the same sequence on every job so nothing gets skipped.
- Confirm required signs and locations. We check what the lot needs against ADA, fire-access, and MUTCD requirements, then map each sign to a spot before anything goes in the ground.
- Locate utilities and mark posts. Before we dig, we have underground utilities located and mark each post position so nothing gets struck.
- Set the posts. We drive posts or set them in a concrete footing depending on the surface and the wind load, at a depth that holds up through freeze-thaw.
- Mount the signs at required heights. Each sign goes on at its correct height — 60 inches to the bottom for accessible-parking signs, the van plaque below it — squared and facing oncoming traffic.
- Inspect for compliance and visibility. We walk the lot to confirm every sign is at the right height, readable, and unobstructed, and that fire lanes and accessible spaces are clearly posted.
For a full list of our pavement marking services, visit our parking lot striping in North Denver page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new
We proudly work with:
We proudly work with:
Frequently Asked Questions About Parking Lot Sign Installation in North Denver, CO
What signs does an ADA accessible space require?
Every accessible parking space needs a sign that displays the International Symbol of Accessibility, mounted so it stays visible when a vehicle is parked in the space — that’s the MUTCD R7-8 sign. Spaces designated van-accessible also need an R7-8a “van accessible” plaque mounted below the main sign. We install both to the 2010 ADA Standards for Accessible Design, at the head of each space so there’s no question which stall the sign governs.
What mounting height is required?
Accessible-parking signs mount with the bottom of the sign at least 60 inches above the ground, measured from the finished surface to the bottom edge of the sign. That height keeps the sign visible above the roof of a parked vehicle, so drivers can spot the space even in a full lot. We set every accessible-parking sign to that minimum and square it to face oncoming traffic.
Do fire lanes need signs too?
Yes. Fire lanes have to stay clear for emergency access, and that’s enforced with no-parking and tow-away signage posted per the local authority having jurisdiction. In the north Denver metro, placement follows Denver and AHJ direction — signs posted where they’re visible from the lane they protect. We install fire-lane, no-parking, and tow-away signs alongside the paint so the restriction is obvious from both the pavement and eye level.
Do you install the posts and footings?
Yes. Sign installation includes the posts, not just the panels. Depending on the surface and wind exposure, we either drive the post or set it in a concrete footing, at a depth that stands up to Colorado’s wind and freeze-thaw cycles. A sign is only as reliable as what holds it up, so we set posts to stay plumb and secure through the seasons rather than working loose after the first hard winter.
Does Denver require a sign permit?
A permit may be required under the Denver Zoning Code depending on the sign type and where it’s placed, and requirements can differ between jurisdictions in the north Denver metro. We install to code and place signs to meet ADA, fire-access, and local requirements. If your project needs a permit, we’ll work within those requirements — call for a free estimate and we’ll walk through what your specific lot needs.
Do you offer free estimates?
Yes. We provide a free estimate for parking lot sign installation on commercial properties throughout the north Denver metro. Tell us what your lot needs — accessible-space signs, fire-lane signage, directional signs, or a full set for a new build — and we’ll spec the signs, posts, and placement to meet ADA, MUTCD, and local Denver requirements. Call for a free estimate to get started. —