Parking Lot Sign Installation
In Austin, TX

Signs We Install

Pavement markings tell drivers where to park; signs tell them the rules. 1-800-STRIPER of Austin supplies and installs the full range of parking-lot signage — accessible-parking signs, fire-lane and tow-away signs, stop and directional signs, and custom property signs — mounted to the correct standard and set to last. Signs are also where a lot’s compliance is most visible to an inspector, so getting them right matters.

We install and replace the whole regulatory set: ADA accessible-parking signs with the International Symbol of Accessibility and “Van Accessible” plates, fire-lane and “Tow Away Zone” signs, stop and yield signs, one-way and directional arrows, speed and pedestrian-crossing signs, and reserved, no-parking, and customer-only signs. We handle post-mount installs in soil and surface mounts on pavement or curb, and we replace faded, bent, or missing signs on existing lots.

For new construction we coordinate the full sign package alongside the striping so nothing is missed at final inspection. For existing properties we audit what is already up, flag the signs that are non-compliant, worn, or gone, and replace them — an accessible sign that has faded past legibility or a fire-lane sign a truck sheared off is a compliance gap even when the paint on the ground is fine.

ADA Accessible-Parking Signs

Every accessible space needs a sign, and the sign has rules. Under the 2010 ADA Standards §502.6, the sign identifying an accessible space must sit with its bottom edge at least 60 inches — five feet — above the ground, high enough to stay visible above a parked vehicle. The sign carries the International Symbol of Accessibility, and van spaces add a “Van Accessible” designation. The regulatory sign format follows the R7-8 series in the Texas Manual on Uniform Traffic Control Devices. Every accessible stall gets its sign set to that compliant height.

Fire Lane & Tow-Away Signage

Austin’s fire code requires signage as part of a marked fire lane. Under the City of Austin Fire Code §503.3, the owner must post signs at both ends of a fire zone or fire lane and at each entry and exit point that forms part of it — in addition to the red-and-white pavement stenciling. We install the fire-lane and “Tow Away Zone” signs to accompany the striping, so the lane is identified the way the fire code and the fire marshal expect. Enforcement of tow-away authority in Texas generally depends on proper signage being in place.

Texas MUTCD Regulatory Sign Standards

The regulatory signs on a private lot — stop, yield, one-way, no-parking, accessible-parking — draw their format and color from the Texas Manual on Uniform Traffic Control Devices, TxDOT’s adoption of the national MUTCD. Consistent, standard signs are what make a lot legible to drivers who expect the same shapes and colors they see on the road. We install to those conventions so the signage reads correctly and looks professional.

Standardization here is not cosmetic. A driver reads a red octagon as “stop” and a blue-and-white symbol as “accessible” without a second thought, and a lot whose signs follow those conventions is safer and easier to enforce than one improvising its own shapes and colors. Where a sign carries a regulatory meaning, the format matters as much as the message.

Our Sign Installation Process

1. Survey. We walk the lot, identify required and requested signs, and confirm mounting locations.
2. Supply. We provide compliant signs and posts, or install owner-supplied signs.
3. Mount. We set posts or surface-mount to the correct height and spacing.
4. Verify. We confirm accessible-sign heights and fire-lane sign placement against the applicable standards.

Why Choose 1-800-STRIPER of Austin

Because we stripe the same lots we sign, the two line up. The ADA sign lands at the compliant §502.6 height above the space we painted; the fire-lane signs match the fire-lane we striped to §503.3. One crew, one visit, and the markings and signage tell a consistent story to drivers and inspectors alike.