ADA Parking Lot Striping
In Knoxville, TN
ADA-Compliant Accessible Parking
1-800-STRIPER provides ADA-compliant parking lot striping in Knoxville, TN — installing accessible spaces, van-accessible stalls, access aisles, ISA symbols, and required signage per the 2010 ADA Standards for Accessible Design and Tennessee Code Section 55-21-105.
1-800-STRIPER® of Knoxville PROVIDes ADA Compliance Services NEAR YOU
Need to make your property more accessible?
Upgrade your facility to become fully ADA compliant by partnering with us to create clear, accessible parking for all your visitors.
Our ADA Compliant line striping services include:
What ADA-Compliant Parking Lot Striping Includes
ADA striping is the set of markings that make a lot’s accessible parking legally usable, and getting it right means matching a federal standard, not eyeballing it. A compliant installation covers the accessible stalls themselves, the striped access aisles beside them, the International Symbol of Accessibility painted in each space, and the upright signage that marks them — including the van-accessible designation where required.
The governing document is the 2010 ADA Standards for Accessible Design, which binds private commercial lots through Title III of the Americans with Disabilities Act. That is the point most lot owners miss: accessible parking is not a courtesy or a local preference, it is a federal requirement with specific dimensions attached. We install to those dimensions and can show you where each one comes from.
How Many Accessible Spaces Your Lot Needs
The number of accessible spaces is set by your lot’s total space count, and it scales as the lot grows. The 2010 ADA Standards use a table: a lot with 1 to 25 spaces needs at least 1 accessible space, 26 to 50 needs 2, 51 to 75 needs 3, and it climbs from there. Tennessee restates a count requirement of its own in TCA §55-21-105, so the two line up for most Knoxville lots.
For very large lots, the federal standard is the one to follow, because it keeps scaling where the state table levels off. We work the count from your actual total, confirm it against both the federal table and the Tennessee requirement, and mark exactly what the lot owes — no fewer, and not a guess.
Van-Accessible Spaces, Access Aisles, and Signage
Three details separate a compliant accessible space from one that just has a symbol painted on it. First, the van ratio: at least one of every six accessible spaces must be van-accessible, with a minimum of one on any lot that has accessible parking. That federal one-in-six ratio is what binds, and it is stricter than some state wording, so we follow it.
Second, the access aisle — the striped no-parking zone beside the space that lets a wheelchair or lift deploy. A standard accessible space needs an access aisle at least 60 inches wide; a van-accessible space needs a wider one, at least 96 inches, or an equivalent arrangement under the standard. Two spaces may share one aisle. Third, signage: each accessible space needs an upright sign with the International Symbol of Accessibility, mounted so it stays visible even when a vehicle is parked, with the “van accessible” designation added where it applies. We install all three, not just the paint.
Tennessee ADA Parking Requirements
Tennessee layers its own statutes on top of the federal standard, and it helps to know which does what. The requirement statute is TCA §55-21-105: it obligates a business with a permanent location to provide marked accessible spaces per a count table, sized with an access aisle and marked with the accessibility symbol. That is the “how many and how” for the state.
The penalty statute is a different section — TCA §55-21-108 — which makes it an offense to park in a marked accessible space without a valid permit and attaches a non-suspendable fine and community service. It is worth knowing these are two separate laws, because Phase-3 research and a lot of online summaries conflate them. For your lot, the one that dictates the striping is §55-21-105, and where federal and state differ, the stricter federal ADA count and van ratio control. We stripe to whichever is stricter so you are covered on both.
Our ADA Striping Process
We treat ADA work as a compliance job, not just a paint job:
- Count and assess. We total your spaces, determine the required accessible count, and check the existing accessible parking against current standards.
- Locate correctly. Accessible spaces go on the shortest accessible route to the entrance — we place or relocate them accordingly, not wherever there is leftover room.
- Stripe to spec. We paint the stalls, the correctly sized access aisles, and the ISA symbols to the 2010 Standards’ dimensions.
- Sign it. We install or verify the upright signage, including van-accessible designations.
- Confirm. We walk the finished spaces against the requirement before we call it done.
Why Choose 1-800-STRIPER for ADA Striping in Knoxville
ADA striping is the service where “close enough” turns into a complaint or a lawsuit, so it is the one to get from a crew that works to the standard on purpose. We count the spaces your lot actually owes, size the aisles correctly, place the spaces on the accessible route, and install the signage — and we can tell you which code line drives each choice. When a lot needs its accessible parking brought up to current spec, we correct it rather than repaint what was already wrong. Call (865) 323-1709 for a free estimate on ADA-compliant striping.
—
For a full list of our pavement marking services, visit our parking lot striping in Knoxville page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new!
We proudly work with:
We proudly work with:
Frequently Asked Questions About ADA Parking Lot Striping in Knoxville, TN
What are the requirements for handicap parking in Tennessee?
Tennessee’s TCA §55-21-105 requires a business with a permanent location to provide marked accessible spaces per a count table, each with an access aisle and the accessibility symbol. On top of that, the federal 2010 ADA Standards apply to your commercial lot through the ADA, setting stall sizes, the one-in-six van ratio, and signage. A separate statute, §55-21-108, penalizes parking in an accessible space without a permit. Where the federal and state rules differ, we stripe to the stricter one.
How many accessible parking spaces am I required to have?
It is based on your total space count. Under the 2010 ADA Standards, 1 to 25 spaces require at least 1 accessible space, 26 to 50 require 2, 51 to 75 require 3, and the number keeps climbing with lot size. Tennessee restates a count requirement as well. For large lots, the federal table governs because it continues scaling. We calculate the exact number from your lot’s real total rather than round.
How many van-accessible spaces do I need?
At least one of every six accessible spaces must be van-accessible, and every lot with accessible parking needs a minimum of one. So a smaller lot with one or two accessible spaces still needs at least one of them to be van-accessible. Van spaces get a wider access aisle and a “van accessible” sign. That one-in-six federal ratio is what we follow, since it is stricter than some state wording and it is what binds your lot.
How wide does an access aisle have to be?
A standard accessible space needs an access aisle at least 60 inches wide. A van-accessible space needs a wider aisle — at least 96 inches — or an equivalent arrangement allowed under the 2010 Standards. The aisle is the striped, no-parking zone beside the space that lets a lift or wheelchair deploy, and it has to connect to an accessible route to the entrance. Two accessible spaces are allowed to share a single access aisle between them.
Do accessible spaces need signs, or is the pavement symbol enough?
Both. The pavement gets the International Symbol of Accessibility, but each accessible space also needs an upright sign mounted high enough to stay visible when a vehicle is parked in the space, with “van accessible” added where it applies. The painted symbol alone does not satisfy the standard. We install or verify the signage as part of the job so the space is compliant top to bottom, not just underfoot.
What happens if my lot is not ADA compliant?
Non-compliant accessible parking exposes a business to ADA complaints and Title III enforcement, and under Tennessee law misuse of accessible spaces carries its own penalties. Beyond the legal risk, it turns away customers who need those spaces. The fix is usually straightforward — recount, resize, relocate, and re-sign to current standards — and it is far cheaper than a complaint. We will assess your lot and tell you exactly what it needs to come into compliance.