Parking Lot Sign Installation
In Bellevue, WA
Sign Installation Services
1-800-STRIPER provides professional parking lot sign installation in Bellevue, WA — installing accessible-space signs carrying the International Symbol of Access required by RCW 46.61.581, fire lane no-parking signs, and directional signage for commercial properties across King and Snohomish counties.
1-800-STRIPER of Bellevue Provides Parking Lot Sign Installation in Bellevue, WA Services NEAR YOU
Are you communicating clearly?
We install new signs in adherence with local regulatory standards and can repair or replace damaged signs so you can clearly communicate your parking requirements.
Accessible-Space Signs Required in Washington
Washington states its accessible-parking sign duty directly. Revised Code of Washington 46.61.581 requires that an accessible space be indicated by a vertical sign carrying the international symbol of access, in white on a blue background as described at RCW 70.92.120. That word *vertical* is doing real work: a symbol painted on the pavement does not satisfy the statute, because a parked vehicle covers it. What makes this worth acting on is how the enforcement is counted. Failure to erect or maintain the required sign is a class 2 civil infraction assessed per parking space. A property with several accessible stalls sharing one faded or missing sign therefore faces a separate infraction for each space, not a single one for the lot. Two related points get misattributed often enough to be worth separating out. The 60-inch mounting height comes from §502.6 of the 2010 ADA Standards for Accessible Design rather than from the Washington statute, and the “Van Accessible” designation is likewise federal.
Fire Lane and Directional Signage for Commercial Lots
Fire lane signage in Bellevue answers to the city rather than to a national code, because Washington adopts the International Fire Code but expressly does not adopt its marking section, leaving the specification to locally adopted standards. Bellevue City Code 23.11.503.3 supplies it. Fire lane signs are type R8-31 or an equivalent reflective sign, no smaller than 12 by 18 inches, white background with “No Parking Fire Lane” in red lettering, mounted at least 7 feet from the bottom of the sign to the street or sidewalk, and spaced no more than 150 feet apart in a straight line of sight — closer where curves or corners restrict visibility. Towing notice is a separate statute and a broader duty. RCW 46.55.070 requires nonresidential private property that impounds unauthorized vehicles to post signs near each entrance stating the times a vehicle may be impounded and the towing firm’s name, telephone number, and address. It attaches to the property as a whole rather than to the fire lane, so a lot with no designated fire lane can still owe it. Directional and regulatory signs — one-way, stop, do not enter, no parking, speed — carry no comparable statutory mandate on private property but do the daily work of keeping circulation predictable.
For a full list of our pavement marking services, visit our parking lot striping in Bellevue, WA page.
Businesses We Serve
How it Works
GET A FREE ESTIMATE
Contact us today and we’ll have a quote to you in 24 hours
SCHEDULE AN INSTALLATION
We’ll have your installation scheduled in less than 7 days, without affecting your business hours
GET A PARKING LOT THAT POPS
For a budget-friendly price, you’ll get a parking lot that looks like new
We proudly work with:
We proudly work with:
Frequently Asked Questions About Parking Lot Sign Installation in Bellevue, WA
What signs are legally required in a parking lot?
Two categories carry statutory backing in Bellevue. Accessible-space signs are required by RCW 46.61.581 — a vertical sign with the international symbol of access, white on blue — with failure to erect or maintain one assessed as a class 2 civil infraction per parking space. Fire lane signs are specified by Bellevue City Code 23.11.503.3 as type R8-31 or equivalent reflective signs, at least 12 by 18 inches, white with red lettering. Directional and regulatory signage is not separately mandated on private property but does the daily work of keeping circulation predictable.
What are the ADA parking sign height requirements?
Signs identifying accessible spaces are mounted so the bottom edge is at least 60 inches above the ground, per §502.6 of the 2010 ADA Standards for Accessible Design — high enough to stay visible over a parked vehicle. That height is a federal requirement, not a Washington one; the state’s own duty, at RCW 46.61.581, is that the space be indicated by a vertical sign carrying the international symbol of access in white on a blue background.
How many ADA parking signs does my lot need?
Each ADA-accessible parking space requires its own individual sign. The number of accessible spaces scales with total lot size per the 2010 ADA Standards: 1–25 total spaces = 1 accessible space (1 sign), 26–50 = 2 spaces (2 signs), and so on. One in every six accessible spaces must be van-accessible with an additional “Van Accessible” sign.
Can parking lot signs be installed in both asphalt and concrete?
Yes. Concrete surfaces require core drilling and concrete anchor bolts. Asphalt installations use driven posts or post sleeves with compacted backfill. Surface-mount bases are available for areas where below-grade installation is not possible, such as parking garage decks. Installation method is selected based on the surface type and wind load requirements.
Do parking lot signs need to be reflective?
Fire lane signs do, by code: Bellevue City Code 23.11.503.3 specifies a type R8-31 or equivalent reflective sign. For accessible-space signs, reflectivity is good practice rather than a stated requirement — Washington’s statute at RCW 46.61.581 specifies the symbol and the white-on-blue color, not a sheeting grade. Reflective signs matter in Bellevue regardless, where short winter daylight and frequent overcast reduce visibility. Note that the MUTCD governs roads open to public travel, not private parking lots.
Should I call 811 before installing parking lot signs?
Yes — always call 811 before digging or driving posts to locate underground utilities. This is a free service and is required by Washington law under RCW 19.122. Hitting an underground gas, electric, or fiber optic line creates serious safety hazards and expensive repair liability.
How are signs mounted on asphalt versus concrete?
Concrete takes core drilling with anchor bolts or an epoxy-set post. Asphalt takes a driven post or a post sleeve with compacted backfill, which holds well provided the depth is right — a shallow set in warm asphalt will lean. Where digging is not an option, surface-mounted bases bolted to the slab are an alternative, though they are more exposed to impact. Wind loading and sight lines matter as much as the fixing method.
How often do parking lot signs need replacing?
Reflective sheeting degrades with UV exposure, so signs lose night-time visibility long before they look worn in daylight. Bellevue’s wet climate also drives corrosion at fixings and post bases. A sign that is faded, delaminating, bent, or turned out of position no longer does its job, and for accessible spaces that is an enforcement matter under RCW 46.61.581, where the duty is to erect and maintain. Reviewing signage alongside a restriping visit keeps the two on the same cycle.