Bollard Installation
In Omaha, NE

Safety and Security Bollards

1-800-STRIPER® installs safety and security bollards in Omaha, NE — protecting storefronts, drive-throughs, fuel stations, and parking areas from vehicle incursions with surface-mount and embedded installations on asphalt and concrete.

1-800-STRIPER® of Omaha PROVIDes Bollard Installation Services NEAR YOU

Need to brighten up your faded parking lot?

Keep your parking lot safe and attractive by restriping annually to freshen up lines and symbols that have faded from the sun, weather, and traffic. Nothing beats a fresh coat of paint!

Benefits:

  • Enhanced safety
  • Enhanced visibility
  • ADA compliance
  • Curb appeal
  • Professional appearance
  • Durable, high-visibility paint for stripes and symbols
  • Parking lot restriping service by 1-800-STRIPER

    Line Striping Services in Omaha, NE

    Bollard Installation for Omaha Commercial and Retail Properties

    Bollards create a physical barrier between vehicles and the people and property they could damage. Whether the goal is storefront protection, pedestrian separation, drive-through definition, or utility pedestal shielding, 1-800-STRIPER® installs bollards rated for the application and anchored correctly for the base surface.

    Types of Bollards We Install

    Bollard typeUse caseRating/spec
    Steel pipe bollard (surface-mount)Light traffic guidance, pedestrian separationStandard commercial applications
    Steel pipe bollard (embedded)Storefront protection, parking lot perimetersHeavy-duty; resists vehicle impact
    Security bollard (ASTM F2656 rated)High-risk storefronts, ATM protectionRated to stop a 15,000-lb vehicle at 30–50 mph
    Flexible/delineator bollardLane guidance, low-impact zonesRebounds after contact; not rated for crash protection
    Fire hydrant protection bollardFDC and hydrant shielding per Omaha Fire CodeProtects fire access equipment from vehicle damage

    Our Bollard Installation Process

    1. Site assessment — identify installation locations, base surface, and rated load requirements
    2. Material selection — confirm bollard type and rating for each location
    3. Layout marking — mark drill points; verify clearance from pedestrian paths and ADA access routes
    4. Core drilling — drill for footing or anchor as required by base type
    5. Footing or anchor set — pour concrete footing or set epoxy anchor; 24-hour cure
    6. Bollard installation — set, plumb, and secure bollard to anchor
    7. Final inspection — verify alignment; check ADA clearance; photograph for documentation

    For a full list of our pavement marking services, visit our parking lot striping in Omaha page.

    Businesses We Serve

    amazon
    Dunkin' Donuts
    mcdonalds
    walmart

    Frequently Asked Questions About Bollard Installation in Omaha, NE

    What is the standard bollard height for a parking lot in Omaha?
    The standard commercial bollard is 42 inches tall and 4 to 6 inches in diameter. This height is visible to drivers but does not obstruct sightlines for pedestrians. Bollards protecting storefronts or high-risk areas may be taller based on rated load requirements.
    How are bollards anchored in asphalt?
    For embedded bollards in asphalt, we core-drill a hole larger than the bollard base, pour a concrete footing in the hole, and set the bollard in the wet concrete. This takes 24 to 48 hours to cure. Surface-mount bollards are anchored with heavy anchor bolts into the asphalt surface — faster but rated for lighter loads.
    Can you install bollards around a fire hydrant in Omaha?
    Yes. Fire hydrant and FDC protection bollards are an important part of protecting fire department access infrastructure. We install protection bollards at a minimum 2-foot offset from the hydrant to allow firefighter access while creating a vehicle barrier.
    Do I need a permit to install bollards on my Omaha commercial property?
    Bollard installation on private commercial property does not typically require a permit in Omaha. However, if bollards are near a public right-of-way or affect sight lines at a driveway, city review may be required. We advise on this during the site assessment.
    How long does bollard installation take?
    Surface-mount bollards can be installed in a few hours. Embedded bollards with a concrete footing require a 24-hour cure time — most installations are complete in 2 days, with the bollard usable on day two after the footing is confirmed cured.

    How it Works

    Step 1: Request a free parking lot striping estimate

    GET A FREE ESTIMATE

    Contact us today and we’ll have a quote to you in 24 hours

    Step 2: Get scheduled in 7 days

    SCHEDULE AN INSTALLATION

    We’ll have your installation scheduled in less than 7 days, without affecting your business hours

    Step 3: Professional striping crew arrives on-site

    GET A PARKING LOT THAT POPS

    For a budget-friendly price, you’ll get a parking lot that looks like new

    We proudly work with:

    Sherwin Williams
    Graco line striping equipment — used by 1-800-STRIPER

    We proudly work with:

    Sherwin Williams
    graco